Cement — Castables
High alumina high strength series refractory castables
Dense high-alumina castables for kiln hoods, coolers and other high-load zones up to 1600 °C.
Technical data →
Products — Full catalogue
All refractory products
Every castable, shaped brick, insulating product and ceramic fibre we manufacture — across cement, metallurgy, glass, lime, electric power and waste incineration kilns. Filter by industry or product family, or search by name.
- 66
- Product families in catalogue
- 6
- Industries served
- 100k t
- Annual production capacity
- 1979
- Making refractories since
Catalogue
Browse every product family
Showing 66 of 66 product families.
Cement — Castables
High strength alkali resistant refractory castable
Alkali-resistant castable for preheater and kiln tail zones exposed to alkali salt attack.
Technical data →
Cement — Shaped bricks
Magnesia alumina spinel brick
Chrome-free basic brick for the firing and transition zones of rotary cement kilns.
Technical data →
Cement — Shaped bricks
Magnesia-iron spinel brick
Good coating adherence and thermal shock resistance for the burning zone of large kilns.
Technical data →
Cement — Shaped bricks
Magnesia calcium zirconium brick
Zirconia-toughened basic brick with strong resistance to clinker corrosion.
Technical data →
Cement — Shaped bricks
Zirconium mullite brick
Abrasion-resistant mullite brick for transition zones and cooler inlets.
Technical data →
Cement — Castables
Wear-resistant and erosion-resistant refractory castable
High-abrasion castable for tertiary air ducts and dust-laden gas paths.
Technical data →
Cement — Application guide
Kiln door cover & cooling machine
Recommended castable grade by clinker output for kiln hood and grate cooler.
Technical data →
Cement — Castables
Anti-stripping castable for kiln mouth
SiC-bearing castable resisting spalling and thermal cycling at the kiln nose ring.
Technical data →
Cement — Castables
Silicon carbide anti-scaling series refractory castables
Non-stick SiC castable that suppresses build-up in preheaters and smoke chambers.
Technical data →
Cement — Shaped bricks
Direct bonded magnesia chrome bricks
Direct-bonded basic brick for severe corrosion duty in cement and lime kilns.
Technical data →
Cement — Castables
New plate-shaped corundum castable
Tabular alumina castable rated to 1750 °C for the most demanding hot spots.
Technical data →
Cement — Shaped bricks
Silicon mullite red brick
Our flagship wear-resistant brick for kiln transition and cooling zones.
Technical data →
Cement — Castables
New low expansion kiln mouth castable
Low-expansion formulation that keeps the kiln mouth crack-free through cycling.
Technical data →
Cement — Shaped bricks
Anti-stripping high alumina brick
Spalling-resistant high-alumina brick with a proven 2-year life in the preheating zone.
Technical data →
Cement — Castables
Special refractory castable for coal injection pipe
Corundum-mullite castable engineered for burner pipes running to 1780 °C.
Technical data →
Cement — Castables
Corundum and mullite series refractory castables
Complete corundum-mullite range covering 1650-1780 °C service temperatures.
Technical data →
Cement — Application guide
Tertiary air duct & coal injection pipe
Recommended grade by clinker output for the tertiary air duct and burner pipe.
Technical data →
Metallurgy — Castables
Corundum-mullite refractory castable
High-purity corundum and mullite aggregates for ladle covers, furnace roofs and burner blocks operating up to 1650 °C.
Technical data →
Metallurgy — Castables
High alumina refractory castable
General-purpose dense high-alumina castable for launders, furnace doors and transition linings up to 1600 °C.
Technical data →
Metallurgy — Shaped bricks
High alumina brick
Fired high-alumina brick in 55, 65 and 75 % Al2O3 grades for hot blast stoves, soaking pits and heating furnaces.
Technical data →
Metallurgy — Castables
Magnesium aluminium castable
Spinel-bonded MgO–Al2O3 castable with excellent slag resistance for steel ladle working linings and permanent layers.
Technical data →
Metallurgy — Shaped bricks
Magnesia-carbon brick
Resin-bonded MgO–C brick in 10, 14 and 18 % carbon grades for BOF converters, EAF hot spots and ladle slag lines.
Technical data →
Metallurgy — Castables
Self-flowing corundum castable
Low-cement, self-flowing corundum castable with >90 % Al2O3 for precast shapes, purging plugs and ladle bottoms.
Technical data →
Metallurgy — Shaped bricks
Aluminium-magnesium-carbon brick
Al2O3–MgO–C brick with in-situ spinel formation for ladle barrel and bottom linings; high load softening temperature.
Technical data →
Metallurgy — Shaped bricks
Outlet pipe brick, sleeve brick, end brick & seat brick
Magnesia-carbon functional shapes for converter tap holes and ladle nozzle seats, machined to drawing.
Technical data →
Metallurgy — Monolithics & linings
Dry bottom ramming material
Magnesia-based dry vibrating mix for electric arc furnace and induction furnace bottoms; fast installation, no drying time.
Technical data →
Metallurgy — Monolithics & linings
Tundish coating
Magnesia–chrome spray/gunning coating for continuous casting tundish working linings; easy deskulling and clean steel.
Technical data →
Metallurgy — Monolithics & linings
Heavy asbestos board
Heavy-duty insulating board used as a compressible expansion and back-up layer behind furnace and ladle linings.
Technical data →
Glass — Silica & clay
Siliceous firebrick
High-purity silica brick with low residual quartz for glass-furnace crowns, breast walls and port necks. Excellent load-bearing capacity close to its melting point and very low creep, so crowns hold geometry over a full campaign.
Technical data →
Glass — Silica & clay
Clay brick
Fireclay brick for the cooler structural parts of the furnace and regenerator — flues, checker support, chimney and backup insulation layers. Stable volume, good thermal-shock resistance and economical for large volumes.
Technical data →
Glass — Silica & clay
High alumina brick
Bauxite-based high alumina brick used where the load and temperature exceed clay-brick limits: regenerator middle chamber, working-end superstructure and feeder channels. Higher hot strength and better alkali-vapour resistance.
Technical data →
Glass — Fused cast & corundum
Fused zirconium high purity corundum brick
Fused-cast AZS-type block combining zirconia and high-purity corundum. The zirconia phase resists molten-glass corrosion at the metal line while the corundum matrix keeps glass defects (stones and cords) to a minimum.
Technical data →
Glass — Fused cast & corundum
Fused corundum brick
α/β fused-cast alumina block with virtually no glassy phase — the reference material for contact with high-quality float, borosilicate and display glass where stone and bubble defects cannot be tolerated.
Technical data →
Glass — Fused cast & corundum
Zircon brick
Sintered zircon (ZrSiO4) brick with outstanding resistance to molten glass and alkali vapour and very low thermal expansion. Used for paving, sidewall backup and forehearth blocks in demanding glass compositions.
Technical data →
Glass — Basic bricks
High purity magnesium brick
High-purity sintered magnesia brick for the regenerator checker top, where alkali sulphate and carry-over batch dust attack acidic materials. High refractoriness and excellent heat-storage behaviour.
Technical data →
Glass — Basic bricks
Directly bonded magnesia brick
Direct-bonded magnesia brick fired at high temperature so periclase grains bond to each other rather than through a silicate phase — markedly better hot strength and resistance to alkali and sulphate corrosion in the regenerator.
Technical data →
Glass — Insulation & monolithics
Thermal insulation materials and amorphous refractory materials
Complete backup and monolithic package: lightweight insulating brick, calcium-silicate and ceramic-fibre board, plus castables, ramming mixes, mortars and coatings used to seal, patch and insulate the furnace shell — cutting heat loss and stabilising crown temperature.
Technical data →
Lime — Shaped bricks
Zirconia-mullite composite wear-resistant brick
ZrO2-reinforced mullite brick with a very low wear coefficient — used in the preheating and transition zones of lime kilns where abrasion and thermal cycling coincide.
Technical data →
Lime — Shaped bricks
High alumina high-strength wear-resistant brick
Dense high-alumina brick for lime kiln preheater and cooler zones subject to continuous mechanical abrasion from limestone charge.
Technical data →
Lime — Shaped bricks
Magnesia alumina spinel brick
Chrome-free spinel brick for the burning zone of rotary lime kilns — excellent thermal shock resistance and resistance to lime-rich slag attack.
Technical data →
Lime — Castables
Wear-resistant and erosion-resistant refractory castable
High-alumina low-cement castable for lime kiln hoods, ducts and cyclones exposed to dust-laden gas streams up to 1600 °C.
Technical data →
Lime — Castables
Anti-stripping castable for kiln mouth
Al2O3–SiC bonded castable engineered against spalling and thermal shock at the discharge end of the lime kiln.
Technical data →
Lime — Shaped bricks
Direct bonded magnesia chrome brick
Direct-bonded MgO–Cr2O3 brick with high hot strength for severe burning-zone conditions and aggressive alkali/lime slag.
Technical data →
Lime — Castables
New plate-shaped corundum castable
Tabular corundum castable rated to 1750 °C for the hottest monolithic sections of lime and calcining kilns.
Technical data →
Lime — Shaped bricks
Silicon mullite red brick
SiC-bearing mullite brick combining wear resistance with high hot strength — the workhorse lining for transition zones of rotary lime kilns.
Technical data →
Lime — Castables
New low-expansion kiln mouth castable
Low-expansion Al2O3–SiC castable for kiln mouths and nose rings, minimising crack formation through repeated heating cycles.
Technical data →
Lime — Shaped bricks
Anti-stripping high alumina brick
Alkali- and spalling-resistant high alumina brick for the kiln tail preheating zone, with a proven service life of over two years.
Technical data →
Lime — Castables
Special refractory castable for coal injection pipe
Prefab-grade castable for burner and coal injection pipes, resisting flame impingement and thermal shock up to 1780 °C.
Technical data →
Electric power — Shaped bricks
High chrome brick
Chromium oxide brick for coal gasifiers and slagging combustion chambers, where molten coal-ash slag attacks the hot face continuously. Available from 75 % to 95 % Cr2O3.
Technical data →
Electric power — Insulating products
High alumina heat insulation brick
Lightweight high-alumina back-up insulation for boiler walls, ducts and gasifier shells — six bulk densities from 1.2 to 0.5 g/cm³ to balance strength against heat loss.
Technical data →
Electric power — Ceramic fibre
Ceramic fibre board
Rigid vacuum-formed fibre board for boiler doors, expansion joints and back-up insulation, classified from 1150 °C to 1400 °C.
Technical data →
Electric power — Ceramic fibre
Ceramic fibre blanket
Needled fibre blanket in 64/96/128/160 kg/m³ densities for boiler casings, flue ducts and turbine exhaust insulation, classified up to 1430 °C.
Technical data →
Electric power — Ceramic fibre
Ceramic fibre loose cotton (bulk fibre)
Bulk spun fibre for packing, mouldables and fibre-reinforced castables. Supplied in 20 kg or 80 kg bags.
Technical data →
Electric power — Shaped bricks
Magnesia spinel brick
Spinel-bonded magnesia brick with good thermal shock resistance for high-temperature zones exposed to alkaline ash and cyclic operation.
Technical data →
Electric power — Shaped bricks
Chrome corundum brick
Corundum brick with 5–30 % Cr2O3 for gasifier and slag-tap zones — the chromia addition raises slag resistance while keeping corundum's strength and load behaviour.
Technical data →
Electric power — Shaped bricks
Zirconium mullite brick
ZrO2-reinforced mullite brick with a very low wear coefficient — used where fly-ash abrasion and thermal cycling occur together.
Technical data →
Electric power — Insulating products
Lightweight mullite brick
Low iron, low thermal-mass mullite insulating brick classified from 1100 °C to 1650 °C — hot-face insulation for boilers, reformers and gasifier outlets.
Technical data →
Electric power — Shaped bricks
Silicon carbide brick
High thermal-conductivity SiC brick from 40 % to 90 % SiC for CFB boiler cyclones, air distributors and ash hoppers, where erosion is the dominant wear mechanism.
Technical data →
Electric power — Shaped bricks
Acid resistant brick
Dense vitrified brick for chimneys, flue-gas desulphurisation ducts and acid condensate zones — acid resistance of 99.7 % and above.
Technical data →
Electric power — Insulating products
Alumina hollow ball brick
Hollow-sphere alumina brick combining a 1800 °C service capability with low thermal conductivity — hot-face insulation for high-temperature power and gasification equipment.
Technical data →
Waste incineration — Shaped bricks
Silicon carbide brick
High thermal-conductivity SiC brick for waste-incineration furnace walls, grate side walls and the first-pass membrane wall — resistant to chlorine-bearing flue gas, alkali salt condensation and slag adhesion.
Technical data →
Waste incineration — Castables
Wear-resistant and erosion-resistant refractory castable
Dense high-alumina castable for the incinerator throat, flue ducts and boiler passes, where fly-ash erosion and abrasive particulate flow dominate wear.
Technical data →
Waste incineration — Castables
Anti-stripping castable for kiln mouth
SiC-bearing anti-spalling castable for the kiln mouth and burner zone of rotary incinerators — designed for severe thermal cycling and mechanical shock during charging.
Technical data →
Waste incineration — Shaped bricks
High alumina brick
Standard high-alumina lining brick for the kiln tail and preheating zone of incineration lines, with a proven service life of more than two years in that position.
Technical data →
Waste incineration — Castables
Corundum and mullite series refractory castables
Corundum and mullite castable family covering the hottest sections of the incineration line — secondary combustion chamber, burner blocks and high-temperature ducts up to 1780 °C.
Technical data →Need a lining recommendation?
Send us your kiln type, operating temperature and atmosphere and our engineers will propose a zone-by-zone refractory package.